GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW) | ||||||
---|---|---|---|---|---|---|
|
12:39 Sep 16, 2019 |
English to Dutch translations [PRO] Tech/Engineering - Medical: Instruments / Imaging instruments | |||||||
---|---|---|---|---|---|---|---|
|
| ||||||
| Selected response from: Barend van Zadelhoff Netherlands Local time: 08:31 | ||||||
Grading comment
|
Summary of answers provided | ||||
---|---|---|---|---|
3 | put-ionisatiekamer / putionisatiekamer / putkamer |
|
Summary of reference entries provided | |||
---|---|---|---|
|
ionization well chamber / well-type ionization chamber put-ionisatiekamer / putionisatiekamer / putkamer Explanation: Deze put-ionisatiekamer wordt gebruikt voor meting van HDR en PDR after-loading bronnen en kan worden geleverd met een TNC, BNT of M connector. Er zijn diverse adapters voor afterloading systemen beschikbaar. https://www.pi-medical.nl/producten/radiologie/manufacturer/... De kalibratiefaciliteit voor put-ionisatiekamers voor iridium-192 high doserate bronnen en low doserate jodium-125 zaadjes dient te worden voltooid. Samen met de beroepsverenigingen moet VSL een aanbeveling formuleren betreffende regelmatige kalibratie van deze putionisatiekamers voor gebruik in de brachytherapie. De controles van de radioactieve bronnen die gebruikt worden bij inwendige bestralingen (brachytherapie) in de ziekenhuizen vindt meestal plaats door middel van put-ionisatiekamers die door de fabrikant zijn gekalibreerd. VSL ontwikkelt op dit moment standaarden voor de kalibratie van deze putkamers voor verschillende radionucliden o.a. voor iridium-192 high dose-rate (HDR) bronnen, en low dose-rate (LDR) jodium-125 zaadjes. https://zoek.officielebekendmakingen.nl/blg-331159.pdf -------------------------------------------------- Note added at 1 hr (2019-09-16 14:11:05 GMT) -------------------------------------------------- Zie ook: https://inis.iaea.org/collection/NCLCollectionStore/_Public/... |
| ||
Grading comment
| |||
Notes to answerer
| |||
Login to enter a peer comment (or grade) |
1 hr |
Reference Reference information: well-type ionisation chamber (ionisation chamber with a 'well', so it seems) images: https://tinyurl.com/yyvgx6vg well = put / koker / schacht Het grote nadeel van de 90Y bronnen is de korte halfwaarde tijd, waardoor de bron wekelijks dient vervangen te worden. De medische fysicus van het ziekenhuis moet bijgevolg een methode uitwerken waarmee de bronactiviteit routinematig kan gecontroleerd worden. Meestal gebeurt dat aan de hand van een well-type ionisatiekamer (putkamer). In samenwerking met het Onze Lieve Vrouw ziekenhuis van Aalst werden alle stappen die tot een dosiswaarde op 2 mm geleid hebben gecontroleerd. Daarbij werden systematisch grote afwijkingen gevonden gaande tot 30 % (zie artikel 5, hoofdstuk 7). De dosisinformatie moet nauwkeurig gekend zijn vooraleer een zinnige vergelijking opgesteld kan worden met de klinische resultaten behaald met 192Ir bronnen. De activiteit wordt gemeten met een putkamer. Een putkamer, gekalibreerd aan de hand van vloeibare scintillatie dosimetrie, wordt hierbij gebruikt als relatief meetinstrument. https://biblio.ugent.be/publication/522158/file/1873657.pdf -------------------------------------------------- Note added at 3 hrs (2019-09-16 15:53:58 GMT) -------------------------------------------------- "ionization well chamber" Few Google hits, but same context, as expected: Safe Practice for the Use of Sealed Radioactive Materials for Brachytherapy There must also be independent calibration checks As well as the manufacturer’s calibration, an independent check must be done with an ionisation well chamber. For long half-life sources that are re-used on patients, this check must be repeated after a year and then every two years to demonstrate that the sources are decaying at the expected rate, as any significant radionuclide impurity could cause otherwise. Any disparities found during calibration checks must be resolved When there is a significant disagreement (Section 5.1.2 of the Code specifies tolerances) between the manufacturer’s certificate and the check measurement, this must be resolved conclusively before the source is used. Once the disparate check measurement has been confirmed (and the stability of the well chamber) the source should be returned to the manufacturer if at all possible. https://tinyurl.com/y3lst6th |
| |
Login to enter a peer comment (or grade) |
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.