18:11 Mar 12, 2018 |
English to Russian translations [PRO] Tech/Engineering - Photography/Imaging (& Graphic Arts) / динамический диапазон и шум в цифровой фотографии/процессы, происходящие на матрице | |||||||
---|---|---|---|---|---|---|---|
|
| ||||||
| Selected response from: didimblog Russian Federation Local time: 17:54 | ||||||
Grading comment
|
Summary of answers provided | ||||
---|---|---|---|---|
3 | выходной шум |
| ||
3 | «нисходящий» шум |
|
Discussion entries: 4 | |
---|---|
выходной шум Explanation: Или шум на выходе Шум не может распространяться обратно (вниз) по схеме. Они просто пересчитывают его на вход |
| ||
Notes to answerer
| |||
Login to enter a peer comment (or grade) |
«нисходящий» шум Explanation: Из Вашего источника: "...noise downstream of the main ISO amplification...". То есть шум вниз по течению после главного усиления ISO, если более-менее дословно. Downstream noise — шум, вносимый элементами, находящимися после усилителя ISO. --- Вот здесь схема в конце раздела ISO-Variant Cameras с разделением элементов на upstream и downstream — https://petapixel.com/2017/03/22/find-best-iso-astrophotogra... "Some noise is random with every shot (shot noise) and some noise is produced consistently by the camera’s sensor (upstream read noise) or produced by the electronics after the sensor’s signal has been amplified (downstream read noise)". По следующей ссылке перевод статьи, там термины переведены как "восходящий" и "нисходящий" шумы — https://photo-monster.ru/lessons/read/kak-podobrat-iso-dlya-... --- Ещё источник — http://dslr-astrophotography.com/iso-dslr-astrophotography/ Схожая схема в разделе ISO and Read Noise. Там два усилителя: аналоговый, в upstream, и цифровой, находящийся в downstream части схемы. "Read noise consists of two different parts; the so called upstream and downstream noise. The upstream noise is all the noise that occurs in the electronics before the actual Analog-to-Digital conversion in the ADC. The downstream noise is anything from that point onward, which of course includes the noise of the ADC itself. ...ISO setting controls the amplification of the output signal of the sensor. This means that all the upstream noise will be amplified with it, while the downstream noise remains consistent". Из Вашего источника: "The two-stage amplification employed by Canon gives a bit more information as to what portion of the read noise can be attributed to different circuit components in its high-end cameras. Because of the second stage of amplification, one has separate information on how much of the read noise is due to noise in the main ISO amplification and how much is downstream from it in the secondary amplification and ADC. One sees from the table that the dominant noise at low ISO arises from the main ISO amplifier noise R1, with a smaller contribution R2 from the components downstream from this amplifier and a negligible contribution from the sensor readout noise R0". --- Upstream noise — шум, вносимый элементами (матрица, аналоговый усилитель ISO, может, ещё и др.), находящимися до АЦП. Downstream noise — шум, вносимый элементами, начиная с АЦП (аналого-цифрового преобразователя, ADC) и далее. -------------------------------------------------- Note added at 3 hrs (2018-03-12 21:57:46 GMT) -------------------------------------------------- "Now remember that the ISO setting controls the amplification of the output signal of the sensor. This means that all the upstream noise will be amplified with it, while the downstream noise remains consistent. In other words; we gain SNR! And this of course is a good thing right? So should we choose very high ISOs then? Well, not so fast. As always, things aren’t quite that easy;). There is a limit to the gain you will get, which is determined by the downstream noise. Once the upstream noise gets high enough OR the downstream noise gets close to zero, the upstream noise will simply swamp out the downstream noise, making it irrelevant. So once we move past this point, the read noise will be scaling linearly with the signal, gaining us nothing anymore in terms of SNR; If you double the signal, you’ll double the noise". http://dslr-astrophotography.com/iso-dslr-astrophotography/ |
| |
Grading comment
| ||
Login to enter a peer comment (or grade) |
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.