Glossary entry (derived from question below)
Dutch term or phrase:
splijtkrachten
Portuguese translation:
forças de clivagem
Added to glossary by
ahartje
Mar 23, 2018 17:55
6 yrs ago
Dutch term
splijtkrachten
Dutch to Portuguese
Tech/Engineering
Construction / Civil Engineering
especificação dormentes
De producent berekent aan de hand van de splijtkrachten ten gevolgen van de voorspanning ter plaatsen van de in te storten (schroef)hulzen de vorm en afmeting van deze splijtwapening.
Proposed translations
(Portuguese)
3 | forças de clivagem | ahartje |
References
splitting force | Erzsébet Czopyk |
Change log
Mar 28, 2018 15:34: ahartje Created KOG entry
Proposed translations
1 day 22 hrs
Selected
forças de clivagem
Estas forças não devem ser confundidas com forças de cisalhamento!
3 KudoZ points awarded for this answer.
Comment: "Tx"
Reference comments
1 day 9 mins
Reference:
splitting force
GTM GTL7000 Professional kloofmachine - Trekkerweb
https://markt.trekkerweb.nl/.../tw4777-gtm-gtl7000-professio...
Translate this page
Other Used Year of production 2015 Split length 104 cm Splitting force 7 t Actuation Electric motor Wedge shaped Single-blade knives - 230 Volt vermogen. ... 230 Volt, vermogen 3kW, splijtkracht 7ton, Max Diameter hout 32cm, Maximale lengte hout 104cm, Opwaartse snelheid 5,4cm/s, Neerwaartse snelheid 6cm/s, ...
Or, maybe you need "Força de corte" - shear force???
The structure is extremely hardwearing and highly resistant to splitting and deformation.
A estrutura das colunas é extremamente durável e altamente resistente à fendilhação ou deformação.
https://en.wikipedia.org/wiki/Shear_stress
A shearing force is applied to the top of the rectangle while the bottom is held in place. The resulting shear stress, τ, deforms the rectangle into a parallelogram. The area involved would be the top of the parallelogram.
A shear stress, often denoted τ (Greek: tau), is the component of stress coplanar with a material cross section. Shear stress arises from the force vector component parallel to the cross section. Normal stress, on the other hand, arises from the force vector component perpendicular to the material cross section on which it acts.
Shear stress arises from shear forces, which are pairs of equal and opposing forces acting on opposite sides of an object.
shall be somewhere here:
https://www.todamateria.com.br/forca-de-atrito/
https://markt.trekkerweb.nl/.../tw4777-gtm-gtl7000-professio...
Translate this page
Other Used Year of production 2015 Split length 104 cm Splitting force 7 t Actuation Electric motor Wedge shaped Single-blade knives - 230 Volt vermogen. ... 230 Volt, vermogen 3kW, splijtkracht 7ton, Max Diameter hout 32cm, Maximale lengte hout 104cm, Opwaartse snelheid 5,4cm/s, Neerwaartse snelheid 6cm/s, ...
Or, maybe you need "Força de corte" - shear force???
The structure is extremely hardwearing and highly resistant to splitting and deformation.
A estrutura das colunas é extremamente durável e altamente resistente à fendilhação ou deformação.
https://en.wikipedia.org/wiki/Shear_stress
A shearing force is applied to the top of the rectangle while the bottom is held in place. The resulting shear stress, τ, deforms the rectangle into a parallelogram. The area involved would be the top of the parallelogram.
A shear stress, often denoted τ (Greek: tau), is the component of stress coplanar with a material cross section. Shear stress arises from the force vector component parallel to the cross section. Normal stress, on the other hand, arises from the force vector component perpendicular to the material cross section on which it acts.
Shear stress arises from shear forces, which are pairs of equal and opposing forces acting on opposite sides of an object.
shall be somewhere here:
https://www.todamateria.com.br/forca-de-atrito/
Something went wrong...