английский => русский Техника zzz Другая тематика zzz

Контрольно-измерительная машина компании FARO

Compensation Dot Plate, Removable Dot Plate feet, and Compensation Positioning Template with shipping case
In the Device Center, click Compensate command to perform a compensation of the projection and camera systems of the using the Compensation Dot Plate and Compensation Positioning Template.
Choose your Compensation Dot Plate serial number from the drop-down list.
If you do not see your Compensation Dot Plate serial number in the list, click Add Compensation Dot Plate, and choose the file included with your Compensation Dot Plate.
Attach the Compensation Dot Plate Feet to each side of the plate so it stands vertically.
Adjust the until the Compensation Positioning Template so that the imaging camera is looking straight to the center of the Compensation Dot Plate.
"(2) Compensation Dot Plate
Move the Compensation Dot Plate to the Start position and adjust the until the cross hairs are centered on the Compensation Dot Plate.
The must be level to the Compensation Positioning Template and should not be pointing up or down at the Compensation Dot Plate.
The must be parallel to the Compensation Dot Plate and should not be facing the Compensation Dot Plate from a side angle.
If you have trouble seeing the cross hairs, hold a white sheet of paper in front of the Compensation Dot Plate.
If the is in a fixed position, adjust the Compensation Positioning Template with the Compensation Dot Plate.
Move the Compensation Dot Plate to Position 1(front) and then to Position 10(rear) and check that the cross hairs remain within the red boxes.
Return the Compensation Dot Plate to the Start Position.
Move the Compensation Dot Plate to position 1.
Hold a white sheet of paper in front of the Compensation Dot Plate.