Nov 27, 2019 10:08
4 yrs ago
2 viewers *
English term
press-in rocker studs to pull loose
English to Polish
Tech/Engineering
Automotive / Cars & Trucks
TIPS ON CHOOSING VALVE SPRINGS
Flat-tappet cam/lifters for street and street/strip: Small block engines will generally require 105 – 125 lb seat pressure Big block engines (due to heavier valves) usually require 115 – 130 lb seat pressure.
Flat-tappet open pressures should not exceed 330 lbs open pressure.
Open pressure should be at least 220 lbs for engines that rev to 4000 rpm. For higher engine speeds, open pressures should be at least
260 lb with stock-weight valves (lighter valves require less open pressure). Be aware that open pressures of 280 lbs or more can cause press-in rocker studs to pull loose, so screw-in studs are needed when open spring pressures exceed about 280 lb.
Flat-tappet cam/lifters for street and street/strip: Small block engines will generally require 105 – 125 lb seat pressure Big block engines (due to heavier valves) usually require 115 – 130 lb seat pressure.
Flat-tappet open pressures should not exceed 330 lbs open pressure.
Open pressure should be at least 220 lbs for engines that rev to 4000 rpm. For higher engine speeds, open pressures should be at least
260 lb with stock-weight valves (lighter valves require less open pressure). Be aware that open pressures of 280 lbs or more can cause press-in rocker studs to pull loose, so screw-in studs are needed when open spring pressures exceed about 280 lb.
Proposed translations
(Polish)
| 3 +2 | może doprowadzić do obluzowania śrub regulacji dźwigienek zaworowych mocowanych na wcisk |
Mateusz Izdebski
|
| 3 | wypchnie drążek popychacza |
Stanislaw Semczuk
|
Proposed translations
+2
15 mins
Mateusz Izdebski
Native in Polish
Works in field
No problem!
Native in: Polish 
Works in: English to Polish, Polish to English, German to Polish, and 1 more.
Related KudoZ points
:
28
Selected
może doprowadzić do obluzowania śrub regulacji dźwigienek zaworowych mocowanych na wcisk
j.w.
Peer comment(s):
| agree |
Crannmer
: Errata. Jest: śrub regulacji. Ma być: szpilek.
może doprowadzić do obluzowania mocowanych wciskowo/poprzez wtłoczenie szpilek dźwigienek zaworowych
18 mins
|
|
Dzięki - skoro na wcisk, to faktycznie szpilki.
|
|
| agree |
Frank Szmulowicz, Ph. D.
1 hr
|
4 KudoZ points awarded for this answer.
Comment: "Dziękuje bardzo"
12 mins
Stanislaw Semczuk
Native in English
&
Polish
Works in field
Native in: English 
, Polish
Works in: Polish to English, English to Polish, Spanish to Polish, and 2 more.
wypchnie drążek popychacza
to widać z tekstu: koniec jakiegos preta, przypuszczalnie elementu zaworu, siedzi w otoczeniu wysokiego ciśnienia i jak ciśnienie będzie zbyt wysokie, to go po prostu wypchnie; generalnie to trzeba najpierw zrozumieć jak to działa
Peer comment(s):
| neutral |
Crannmer
: "generalnie to trzeba najpierw zrozumieć jak to działa" - hear, hear.
7 hrs
|
Discussion