This site uses cookies.
Some of these cookies are essential to the operation of the site,
while others help to improve your experience by providing insights into how the site is being used.
For more information, please see the ProZ.com privacy policy.
This person has a SecurePRO™ card. Because this person is not a ProZ.com Plus subscriber, to view his or her SecurePRO™ card you must be a ProZ.com Business member or Plus subscriber.
Affiliations
This person is not affiliated with any business or Blue Board record at ProZ.com.
English to Spanish: Product description (Excerpt). Names edited for legal reasons General field: Medical Detailed field: Medical: Pharmaceuticals
Source text - English What Product A Is Used For:
• Treatment of recurrent or metastatic cervical cancer in patients whose tumors express PD-L1 (combined positive score [CPS] ≥ 1), as determined by an approved test, and with disease progression on or after chemotherapy.
• For the treatment of unresectable or metastatic melanoma.
• Treatment of recurrent locally advanced or metastatic gastric or gastroesophageal junction adenocarcinoma in patients whose tumors express PD-L1 (CPS ≥ 1), as determined by an approved test, with disease progression on or after two or more prior lines of therapy including fluoropyrimidine- and platinum-containing chemotherapy, and if appropriate, HER2/neu-targeted therapy.
[...]
How Product A Works:
Product A is classified as a monoclonal antibody. Monoclonal antibodies are a relatively new type of “targeted” cancer therapy.
Antibodies are an integral part of the body’s immune system. Normally, the body creates antibodies in response to an antigen (such as a protein in a germ) that has entered the body. The antibodies attach to the antigen in order to mark it for destruction by the immune system.
To make anti-cancer monoclonal antibodies in the laboratory, scientists analyze specific antigens on the surface of cancer cells (the targets). Then, using animal and human proteins, they create a specific antibody that will attach to the target antigen on the cancer cells. When given to the patient, these monoclonal antibodies will attach to matching antigens like a key fits a lock.
Since monoclonal antibodies target only specific cells, they may cause less toxicity to healthy cells. Monoclonal antibody therapy is usually only given for cancers in which antigens (and the respective antibodies) have been identified already.
Product A is a highly selective humanized monoclonal IgG4 antibody directed against the PD-1 receptor on the cell surface. The drug blocks the PD-1 receptor, preventing binding and activation of PD-L1 and PD-L2. This mechanism causes the activation of T-cell mediated immune responses against tumor cells.
Translation - Spanish Para qué se utiliza el Producto A:
• Tratamiento de cáncer cervical recurrente o metastásico en pacientes cuyos tumores expresan la PD-L1 (puntuación positiva combinada [CPS] ≥ 1), según lo determinado por un test aprobado, y con desarrollo de la enfermedad durante o después de la quimioterapia.
• Para el tratamiento de melanoma irresecable o metastásico.
• Tratamiento de adenocarcinoma gástrico o de la unión esofagogástrica localmente avanzado o metastásico y recurrente, en pacientes cuyos tumores expresan la PD-L1 (CPS ≥ 1), según lo determinado por un test aprobado, con desarrollo de la enfermedad durante o después de dos o más líneas previas de tratamiento que incluyan quimioterapia con fluoropirimidina y platino y, si corresponde, tratamiento dirigido al HER2/neu.
[...]
Cómo actúa el Producto A:
El Producto A está clasificado como anticuerpo monoclonal. Los anticuerpos monoclonales son un tipo relativamente nuevo de terapia dirigida contra el cáncer.
Los anticuerpos son una parte integral del sistema inmunológico del cuerpo. Normalmente, el cuerpo crea anticuerpos en respuesta a un antígeno (como una proteína presente en un germen) que haya entrado en el cuerpo. Los anticuerpos se adhieren al antígeno para marcarlo, de forma que el sistema inmunológico lo destruya.
Para crear anticuerpos monoclonales contra el cáncer en laboratorio, los científicos analizan antígenos específicos de la superficie de las células cancerosas (los objetivos). Luego, usando proteínas animales y humanas, crean un anticuerpo específico que se adherirá al antígeno objetivo en las células cancerosas. Cuando se administran al paciente, estos anticuerpos monoclonales se adhieren a los antígenos coincidentes como una llave encajando en una cerradura.
Puesto que los anticuerpos monoclonales sólo se dirigen a células específicas, pueden resultar menos tóxicos para las células sanas. La terapia con anticuerpos monoclonales generalmente sólo se administra en casos de cáncer en los que los antígenos (y sus respectivos anticuerpos) ya han sido identificados.
El producto A es un anticuerpo monoclonal humanizado IgG4 altamente selectivo, dirigido contra el receptor PD-1 de la superficie celular. El fármaco bloquea el receptor PD-1, evitando la unión y activación de las PD-L1 y PD-L2. Éste mecanismo provoca la activación de respuestas inmunitarias mediadas por células T contra las células tumorales.
English to Spanish: Column Chromatography (Excerpt from a translated wikipedia article) General field: Science Detailed field: Chemistry; Chem Sci/Eng
Source text - English Column preparation
A column is prepared by packing a solid absorbent into a cylindrical glass or plastic tube. The size will depend on the amount of compound being isolated. The base of the tube contains a filter, either a cotton or glass wool plug, or glass frit to hold the solid phase in place. A solvent reservoir may be attached at the top of the column.
Two methods are generally used to prepare a column: the dry method and the wet method. For the dry method, the column is first filled with dry stationary phase powder, followed by the addition of mobile phase, which is flushed through the column until it is completely wet, and from this point is never allowed to run dry. For the wet method, a slurry is prepared of the eluent with the stationary phase powder and then carefully poured into the column. The top of the silica should be flat, and the top of the silica can be protected by a layer of sand. Eluent is slowly passed through the column to advance the organic material.
The individual components are retained by the stationary phase differently and separate from each other while they are running at different speeds through the column with the eluent. At the end of the column they elute one at a time. During the entire chromatography process the eluent is collected in a series of fractions. Fractions can be collected automatically by means of fraction collectors. The productivity of chromatography can be increased by running several columns at a time. In this case multi stream collectors are used. The composition of the eluent flow can be monitored and each fraction is analyzed for dissolved compounds, e.g. by analytical chromatography, UV absorption spectra, or fluorescence. Colored compounds (or fluorescent compounds with the aid of a UV lamp) can be seen through the glass wall as moving bands.
Translation - Spanish Preparación de la columna
Para preparar una columna, se introduce un absorbente sólido en un tubo cilíndrico de vidrio o plástico. El tamaño de este tubo dependerá de la cantidad de compuesto que se aísla. La base del tubo contiene un filtro, ya sea un tapón de algodón o lana de vidrio, o frita de vidrio que sujete la fase sólida. Un depósito de solvente puede fijarse a la parte superior de la columna.
Por lo general, se usan dos métodos para preparar una columna: el método seco y el método húmedo. Para el método seco, primero se llena la columna con la fase estacionaria en forma de polvo seco, tras lo cual se añade la fase móvil, que se pasa a través de la columna hasta que esté completamente húmeda, y que a partir de ese punto se procura que no llegue a secarse. Para el método húmedo, se prepara una suspensión del eluyente con la fase estacionaria en polvo, que a continuación se vierte cuidadosamente en la columna. La parte superior del sílice debe ser plano, y puede protegerse mediante una capa de arena. El eluyente se pasa lentamente a través de la columna para hacer avanzar el material orgánico.
Los componentes individuales son retenidos de formas distintas por la fase estacionaria, separándolos entre sí mientras recorren la columna a distintas velocidades junto con el eluyente. Al final de la columna se van eluyendo uno a uno. Durante todo el proceso de cromatografía el eluyente se colecta en una serie de fracciones. Éstas pueden recogerse automáticamente mediante un colector de fracciones. La productividad de la cromatografía puede incrementarse usando varias columnas al mismo tiempo. En este caso, se utilizan colectores multiflujo. La composición del flujo de eluyente puede ser monitorizado, y cada fracción es analizada en busca de compuestos en disolución, por ejemplo mediante cromatografía analítica, espectroscopia ultravioleta-visible, o espectroscopia de fluorescencia. Los compuestos coloreados (y los compuestos fluorescentes, usando una lámpara ultravioleta) pueden observarse a través de la pared de cristal, en forma de bandas móviles.
English to Spanish: Final Project for a bachelor's degree course at Universidad de Extremadura (Excerpt) General field: Tech/Engineering Detailed field: Agriculture
Source text - English Automation in Agriculture
The use of sensors and automated actuators in agriculture has always been dependent on its profitability. For large scale, open-field operations, automation is usually prohibitively expensive and cumbersome, often requiring large, specialized structures or machinery, such as pivot irrigation or sluice controls. For smaller areas, some systems are more easily implemented, and a few are even a common sight: the most ubiquitous of these are probably sprinklers, which can be found in almost every public and private garden. However, these systems usually behave in a purely periodical manner regardless of external conditions - such as the presence of rain or even just an overcast sky - and any modification on this behaviour must usually be set up manually. Indeed, in most cases any sensors used in agriculture will be handheld ones.
There is a field, however, in which automation and constant monitoring are an intrinsic part of the system: greenhouses. The precise conditions that need to be maintained within a greenhouse call for an almost constant monitorization and adjustment. While this has traditionally been done by hand, the last few decades have seen an increase in the use of digital systems to help control these tasks. This process has been accelerated by the ever-decreasing cost of sensors, and the new levels of miniaturization achieved in processors: these factors allow relatively cheap and non-intrusive systems to be set up, often making use of pre-existing control tools.
This new affordability has allowed for this kind of technology to be applied to another field of agriculture: urban farming and gardening. From the humble potted houseplant to the sustainability-oriented urban plot, a certain amount of private greenery has always been a part of the city landscape. In these cases, a complex and expensive system for automation is rather impractical; thus, it has not been until very recently that new techniques in automation have started to be implemented at such a small sale.
The advantages offered by this kind of small, affordable devices can be best seen in the case of a product that has been on the rise for some time now: the microcontroller.
Translation - Spanish La Automatización en la Agricultura
El uso de sensores y actuadores automatizados en la agricultura siempre ha dependido de su rentabilidad. En el caso de operaciones de campo abierto a gran escala, la automatización suele ser prohibitivamente costosa y engorrosa, y a menudo requiere estructuras o maquinaria grandes y especializadas, como las usadas en el riego por pivote o para el control de esclusas. Para áreas más pequeñas, algunos sistemas se implementan más fácilmente, y algunos son incluso relativamente habituales: los más comunes son probablemente los aspersores, que se pueden encontrar en casi todos los jardines públicos y privados. Sin embargo, estos sistemas suelen comportarse de una manera puramente periódica, independientemente de condiciones externas, como pueden ser un cielo nublado o incluso lluvioso: cualquier modificación de este comportamiento generalmente debe configurarse manualmente. De hecho, en la mayoría de los casos, los sensores utilizados en la agricultura serán aparatos portátiles.
Existe un campo, sin embargo, en el que la automatización y monitorización constantes son una parte intrínseca del sistema de agricultura: los invernaderos. Las condiciones precisas que deben mantenerse dentro de un invernadero requieren de una monitorización y un ajuste casi constantes. Si bien tradicionalmente esto se ha hecho manualmente, en las últimas décadas el uso de sistemas digitales para ayudar a controlar estas tareas a aumentado considerablemente. Este proceso se ha visto acelerado por la disminución constante del precio de los sensores, así como los niveles de miniaturización alcanzados en el campo de los procesadores: estos factores permiten la instalación de sistemas no intrusivos y relativamente baratos, que a menudo aprovechan herramientas de control preexistentes.
Esta nueva accesibilidad ha permitido que este tipo de tecnología sea aplicado a otra rama de la agricultura: la jardinería y horticultura urbanas. Desde la humilde planta de interior, en su tradicional tiesto, hasta una parcela urbana ecológica y sostenible, el paisaje urbano siempre ha contado con una cierta cantidad de vegetación. En estos casos, un sistema de automatización complejo y costoso resultaría poco práctico; es por ello que no ha sido hasta hace poco que se han empezado a implementar nuevas técnicas de automatización a pequeña escala.
Las ventajas ofrecidas por este tipo de dispositivos pequeños y asequibles pueden verse en el caso de un producto que ya lleva un tiempo en auge: el microcontrolador.
English to Spanish: Final Project for a bachelor's degree course at Universidad de Extremadura (excerpt from a LaTeX file) General field: Tech/Engineering Detailed field: Computers: Software
Source text - English \subsection{Connecting to the WiFi\
The first step our program takes is attempting to connect to an available WiFi network, whose SSID and password are given in the arduino_secrets.h file. For this, we will start from the code provided in one of the built-in examples provided with the WiFi101 library, called WiFiWebClient: this sketch allows an Arduino development board to connect to a website. The sketch, however, needs to be modified in several ways to suit our purposes.
First of all, since in the Adafruit Feather WiFi has an integrated WiFi module, the following line must be added to the Setup function, to set up the appropriate pins:
\\ \includegraphics{SetPins.jpg} \\
The program will then try to connect to the WiFi, using the following function, part of the WiFi101 library:
\\ \includegraphics{WifiBegin.jpg} \\
This function initializes the WiFi library’s network settings, and provides its current status – this will be shown through the serial port for debugging purposes.
Another modification must still be made to the base protocol. As it is, the sketch connects to the WiFi network during the setup step, halting the whole program until the network is found. Although the IoT capabilities are an important part of our system, we also want it to be able to work as an automated irrigation system while offline. Thus, we divide the protocol for connecting to the WiFi network into two separate functions: WiFi_Setup_Step() and WiFi_Loop_Step(). The first one will configure the WiFi settings during the setup step, while the second one checks whether the board is connected to the network once every few seconds: if not, it will try to reconnect on the spot. This is done to prevent the program from stopping for too long in case it is unable to reconnect. Each attempt at connecting can take several seconds: trying unsuccessfully to connect to the network each cycle of the program would slow it down to a crawl, and impede its proper functioning. In order to control the timing of the attempts, the timer Connectionchrono is used.
Translation - Spanish \subsection{Conexión a la red WiFi}
El primer paso que ejecuta nuestro programa es tratar de conectarse a una red WiFi disponible, cuyos SSID y contraseña vienen dados por el fichero arduino_secrets.h. Para ello, partimos del código proporcionado por uno de los ejemplos ofrecidos junto a la librería WiFi101, llamado WiFiWebClient: este sketch permite a una placa de desarrollo Arduino conectarse a un sitio web. Sin embargo, es necesario realizar varias modificaciones al sketch para adecuarlo a nuestros propósitos.
En primer lugar, puesto que la Adafruit Feather WiFi dispone de un módulo WiFi integrado, la siguiente linea debe ser añadida a la función Setup, para configurar los pines correspondientes:
\\ \includegraphics{SetPins.jpg} \\
El programa intentará entonces conectarse con la WiFi, usando la siguiente función, parte de la librería WiFi101:
\\ \includegraphics{WifiBegin.jpg} \\
Esta función inicializa la configuración de red de la librería WiFi, y devuelve su estado actual - éste será mostrado a través del puerto serie con fines de depuración.
Aún será necesario realizar otra modificación al protocolo base. En su estado actual, el sketch conecta a la red WiFi durante el paso de configuración, deteniendo todo el programa hasta que encuentra la red. Aunque las capacidades IoT son desde luego una parte importante de nuestro sistema, también queremos que sea capaz de funcionar como un sistema de riego automatizado cuando no tenga conexión online. Por lo tanto, dividimos el protocolo para conectarse a la red WiFi en dos funciones distintas: WiFi_Setup_Step() y WiFi_Loop_Step(). La primera configurará la WiFi durante el paso de configuración, mientras que la segunda verifica cada pocos segundos si la placa está conectada a la red: de no ser así, intentará volver a conectarse en ese momento. De esta forma se evita que el programa se detenga durante mucho tiempo, en caso de que no pueda volver a conectarse. Cada intento de conexión puede llevar varios segundos: si el programa intentase conectarse a la red, sin éxito, en cada uno de sus ciclos, se ralentizaría e impediría su correcto funcionamiento. Para controlar el ritmo de los intentos, se usa el temporizador Connectionchrono.
More
Less
Translation education
Master's degree - Universidad Pompeu Fabra
Experience
Years of experience: 7. Registered at ProZ.com: Sep 2019.
As a Physics graduate with a Masters degree in Translation and a focus on technical-scientific translation, I am greatly familiarized with the terminology, methods and discourse of science, industry and academia.
This education is complemented by my previous work as a freelance technical translator, particularly in the renewable energy and recycling industries. In this line of work, I was able to fully apply not only my previous knowledge of the field, but also my aptitude for research and in/depth documentation.
Finally, these skills are rounded out with my own wide range of personal interests, from sociology to environmentalism, as well as art, technology and digital entertainment.
Born and raised in Spain, my working languages are Spanish and English, in which a bilingual education at all levels has ensured a high level of fluency. I also have a passing knowledge of French and Catalan, as well.
I put care and professionalism in every one of my projects, and I am always on the look for new clients with which to establish long-lasting work relationships. For this, communication is critical, and I am careful to provide insight to my process and decisions. Every translation is a collaboration effort between translator and client, and I make sure that my own work ethic reflects that idea.